What a Staircase Costs in India

What Moves the Number, and How We Quote

We are often asked for a price list, and it is fairer to explain why we do not publish one than to put up a figure that will not hold. Every staircase we build is made to order. Each one brings its own constraints of access, material and detail, and the work involved is rarely the same twice, so a single published number would be wrong for most of the people reading it.

What we do instead is quote against your project. Send the measurements and what you have in mind, and you get a figure for your staircase rather than a range that fits nobody. That quotation covers fabrication, finish, transport and installation, so there is no separate bill later.

A staircase is not a product with a shelf price. Two staircases in the same city, both spiral, both steel, can differ by a factor of three. What follows is what actually moves the number, so you can judge a quote instead of just comparing totals.

What decides the price

  1. Floor-to-floor height. This sets the number of risers. Building codes cap how tall a riser can be, so height is not something a supplier can economise on. A taller floor means more steps, more material and more labour.
  2. The shape. A straight flight is the cheapest thing to build. Spiral costs more because every tread is cut and set individually around a column. Curved and helical staircases cost the most, because each stringer is rolled to a specific radius and nothing is repeatable.
  3. Structural material. We fabricate in mild steel and stainless steel. Mild steel is the baseline; stainless costs considerably more and is chosen for coastal or humid conditions, where it saves the cost of maintaining a coating.
  4. Tread material. Steel treads are the cheapest. Timber, stone and glass each add cost, and glass adds the most because it must be toughened or laminated and cut to exact size with no adjustment on site.
  5. The railing. This is the item most often underestimated. A plain steel baluster railing and a frameless glass balustrade with stainless standoffs are not in the same price bracket, and the railing can account for a large share of the total.
  6. Finish. Powder coating, painting, galvanising, buffing and PVD each carry different costs and different lifespans. The cheapest finish is rarely the cheapest over ten years, particularly in coastal air.
  7. Site access. If components cannot pass through the door, lift or stairwell, they have to be made in smaller sections and joined on site, which adds fabrication and installation time.

Where budgets usually go wrong

  • Pricing the staircase and forgetting the railing. Ask whether a quote includes the balustrade and handrail, because a quote without them will always look cheaper.
  • Choosing glass late. Toughened glass cannot be trimmed after manufacture. Deciding on glass after the structure is built usually costs more than deciding at drawing stage.
  • Ignoring removal. If an existing staircase has to come out, that is demolition, disposal and making good, and it is separate from building the new one.
  • Comparing quotes with different scopes. Transport, installation, finishing and site protection are sometimes excluded to make a headline number look better. Compare what is included, not the total.

How to get a real number

A firm price depends on these. Without them any figure is an estimate, and estimates move once the real dimensions arrive.

  • Floor-to-floor height, finished floor to finished floor
  • The opening size in the upper floor, or the footprint available
  • Whether you want straight, spiral, curved, L-shaped or cantilevered
  • Material for the structure, the treads and the railing
  • Photographs of the space, including the ceiling
  • Whether an existing staircase has to be removed
  • The width of the doors and passages the components must pass through

Common questions

Is a spiral staircase cheaper than a straight one?

Usually not. A spiral saves floor area, not money. It is chosen when space is the constraint. A straight flight in the same material is normally the cheaper build.

Does a taller ceiling cost proportionally more?

Roughly, yes, because riser height is capped by code, so extra height means extra steps rather than taller ones.

Is stainless steel worth the difference?

In coastal and humid cities it usually is, because mild steel needs its coating maintained and stainless does not. Inland and indoors, a well finished mild steel staircase can last just as long for less.

Do you charge for the drawing?

No. We work from your drawings and specifications, advising on materials from experience, and the shop drawings we produce are part of the contract. Their cost is already in the quotation, so there is no separate design fee.

Do you carry out site visits outside Mumbai?

Yes. We take on projects across India, and we survey the site once the quotation is agreed. Before that point your measurements and photographs are enough for us to quote, wherever you are.

Send your measurements and we will come back with a drawing and a firm price, not a range. Start your enquiry, see how delivery across India works, or browse completed projects.

Cost and upkeep are related: the cheapest finish is rarely the cheapest over ten years. Our staircase maintenance guide explains what each material asks of you once it is installed.